Interchangeable Lens Camera Accessory
FL-900R Electronic Flash
High-power flash with superb tracking for sequential shooting
This is a high-power flash with a maximum guide number of 58. It features superb tracking performance for high-speed sequential shooting. It is dustproof, splashproof, and freezeproof down to -10℃, expanding your photographic possibilities.
High-power flash with a guide number of 58
This high-power flash has a maximum guide number of 58. By combining the TruePic image processor and TTL synchronisation technology, optimal lighting is produced. It covers an illumination angle of 24-200mm and 14-20mm when using a wide panel. * .
* 35mm equivalent
10-fps sequential shooting tracking performance
The FL-900R has the highest sequential shooting tracking performance in its class at 10 fps. Charging circuits optimised for NiMH batteries reduce charging time to approximately 2.5 seconds. The firing range has also been expanded to low intensity levels for enhanced tracking performance during high-speed sequential shooting.
1. When using a clip-on flash with a guide number of 50 or higher powered by four AA batteries. Based on Olympus research as of September 2016.
2. When using the OM-D E-M1 Mark II, at a flash ratio of 1/32.
Compact, lightweight flash that is dustproof, splashproof and freezeproof down to -10℃
The FL-900R is compact and lightweight, making it highly portable. Additionally, since it is dustproof, splashproof and freezeproof down to -10°C like the OM-D E-M1 Mark II, E-M1, or E-M5 Mark II, using this flash with any of those cameras lets you shoot in a variety of severe environments.
Useful in all types of photography
Equipped with a commander function for coordinating with wireless flash units
This flash unit can be used for multiple-high-power-flash photography via wireless control. From the camera, you can adjust settings for up to 4 flash groups. The flash also comes equipped with a slave function. In addition, the FL-900R can be attached to the hot shoe of a camera and can be used as the master flash when using the commander function. An IR filter is included for when the commander light is not necessary.
1. A commander function-compatible camera is required.
Compatible with Multi Mode
This FL-900R is compatible with Multi Mode for firing the flash multiple times during long exposures or bulb shooting to express subject motion.
* Compatible cameras: OM-D E-M1 Mark II (as of November 2016)
* Caution: successive use of the flash on human subjects may affect their health.
Compatible with High Res Shot, Focus Stacking, and Focus Bracketing
This flash unit can be used with popular features on the OM-D E-M1 Mark II such as High Res Shot, Focus Stacking, and Focus Bracketing.
* Manual flash only
Equipped with an LED light for videos
This unit is equipped with an LED light for video recording in darker areas using OM-D Movie. It can also be used as an AF illuminator.
|Guide Number (ISO 100•m)||GN 58 (Firing angle: 100mm)
GN 14 (Firing angle: 7mm)[*]
|Firing Angle||Covers the angle of view of a 12mm to 100mm Micro Four Thirds lens (35mm equivalent: 24mm to 200mm)
Covers the angle of view of a 7mm to 10mm Micro Four Thirds lens (35mm equivalent: 14mm to 20mm)[*]
|Built-in Functions||Wide panel, catch light plate|
|Flash Modes||TTL-Auto, Auto, Manual, FP TTL-Auto, FP Manual, and Multi|
|Flash Emission Period||Approx. 1/20000 to 1/500 sec. (except when using Super FP flash)|
|Remote Control (RC)||Flash mode: RC, SL Auto, SL Manual
Can control 4 groups of flashes independently from each other (3 slave flash groups + flash on camera body)
|Bounce Angle||Up: 0 to 90 degrees, down: 0 to 7 degrees, right: 0 to 180 degrees, left: 0 to 180 degrees|
|LED||Power: 1.5 W
Firing Angle: approx. 70 degrees
Illuminance: 100 Lux @ 1 m
Control mode: Auto, Manual, and Off with adjustment possible by 1 EV step from Full to 1/32
|Power Supply||4 AA (R6) alkaline batteries
4 AA (R6) NiMH batteries (Recommended)
|Charging Time||Approx. 4.5 sec. (when using AA alkaline batteries)
Approx. 2.5 sec. (when using AA NiMH batteries)
|Flash Emission Count||Approx. 160 times (when using AA alkaline batteries)
Approx. 200 times (when using AA NiMH batteries)
|LED Emission Time||Approx. 2.4 hours (when using AA alkaline batteries)
Approx. 2.6 hours (when using AA NiMH batteries)
|Operating Environment||-10°C to 40°C|
|Size||W 81.2 mm x H 121.4 mm x D 125.2 mm (excluding protrusions)|
|Weight||382 g (excluding batteries)|
|Box Contents||Flash stand FLST-1, flash case, bounce adapter, IR filter, instruction manual, Warranty Card|
* 1. Measurements obtained from in-house tests at Olympus, using new or fully charged batteries. Actual figures may vary depending on shooting conditions.
* 2. Batteries may not withstand lower temperatures. In such environments, keep batteries warm prior to use.
* This cannot be used together with the hot shoe accessories.
* Specifications are subject to change without any notice or obligation on the part of the manufacturer.